How should container houses be installed? Today, the editor will tell you about the steps to install a container house for living.

1. The installation of steel structure components for residential container houses must meet standard requirements. Do not omit the positions that need to be welded, and do not weld incorrectly, which may cause instability or even cracking in the future. When installing the wall, it should be horizontally and vertically, the caulking should be dense and smooth, the deep and shallow seams should be of the same width, and the board surface should not be damaged.
2. If you need to paste wallpaper indoors, make sure it is smooth, bubble-free and clean. The ceiling should be assembled flat and with straight seams, and the gaps should be consistent. The wallpaper should be clean and the board surface should not be broken. Any damage to the wallpaper surface during transportation should be repaired.
3. The floor slabs should be laid with dust. Floor slabs with cracks on the slabs are prohibited from being installed and used. The surface of the cement or fine stone concrete surface layer should be compact and polished, and no defects such as cracks, peeling, sanding, and hollowing are allowed.
4. Asbestos tiles must be laid in the leeward direction according to the local wind direction characteristics, and the eaves should be kept straight. There should be no cracks in the tiles, the tile ditch should be tightened appropriately, and there should be no leakage in the roof.
5. The tinplate gutter joints of residential container houses are welded firmly, and the joints must be anti-corrosion treated. There should be no accumulation of water in the gutter and no water leakage.
6. Install the doors and windows accurately and tighten them with bolts, and the entire container house will be installed.