It takes 10 times as much time to build a 100-square-meter house using traditional methods as it does to build a prefabricated house. Light steel prefabricated houses do not require cement, bricks, tiles and other building materials like traditional houses. They can be assembled directly using prefabricated house modules, eliminating the need for many building materials. The cost savings are higher, materials are saved, and the construction time is short. This is Prefab houses have significant advantages as temporary residences.
The application range of prefabricated houses is becoming more and more extensive. The prefab houses built by the prefab house manufacturers are mainly made of color steel plates and steel structures, which are made through appropriate layout.
Installation methods of prefabricated houses and matters needing attention.
1. For the installation of the prefabricated house, the floor plan must be designed first, and the panels at various locations should be spliced together. The panels should be fixed with nails, but the nails should be connected with rivets.
2. After nailing the rough frame, use 75mm self-tapping nails to connect the large corrugated tiles one by one, and connect the ridge to the ridge tiles, then connect the closing ends, then install the sink and fix it with rivets.
3. Put glass glue in each gap, fully connect the glass glue in each gap with the board, pay attention to the amount, and the installation is basically completed.