Component joining devices for military containers include corner posts and corner fittings. The corner post is located at the bottom of the corner piece. The top of the corner post matches the surface of the corner piece. The front and one sides of the corner post are provided with positioning pins. The back side of the corner post is provided with a positioning shell. The side of the positioning pin close to the positioning shell passes through the corner post. Stretching into the positioning housing, a limiting mechanism is provided in the positioning housing. The rear side of the limiting mechanism passes through the positioning housing and extends to the rear side of the positioning housing. The surface of the limiting mechanism matches the surface of the positioning pin.
Military containers are equipped with positioning pins, positioning shells and limiting mechanisms. The positioning pins extend into the positioning shell through the corner posts and corner pieces. By moving the push rod, the push rod drives the transmission rod and the fixed block to move, and the fixed block drives the movable plate and the limit plate to separate from the surface of the positioning pin, which solves the problem that the existing container corner posts are easily affected by impact and deformation during use. Corner posts and corner pieces are usually connected with bolts, and the installation and removal process is complicated. At the same time, bolts are prone to rust, causing the bolts to rust.
Military containers with water supply and solar energy devices include containers and water supply mechanisms. The lower end of the container is provided with supporting feet, and the upper end of the container is provided with a lighting lamp; at the same time, there are vertical poles in the container, and every two vertical poles are on the same vertical line, and there are horizontal plates between adjacent vertical poles. There is a humidity detector on the side, and a water receiving box is provided at the bottom of the container. The water receiving box is located under the placement plate; the water supply mechanism is installed on the container. There are mounting bases symmetrically provided on both sides of the water supply mechanism. The bottom of the mounting base is connected to the base through a support rod. The upper end of the container is connected, and the solar photovoltaic panel is installed on the upper end of the mounting base.
Military containers with water supply and solar energy devices are equipped with filter plates and shields in the water tank to facilitate filtering rainwater and prevent impurities from clogging and affecting use. The water storage tank in the water supply mechanism facilitates the storage of filtered rainwater for later use. At the same time, the water is sprayed out through the spray pipe through the water pump to improve the usability of the container.