How to install a container mobile home? Today I will tell you about the steps and let’s learn about it together.
Step 1: First tighten the four columns of the floor with screws, place the top plate, and install the water pipes. Check whether the foundation is level before installation.
Step 2: Install the wall panel according to the design drawings, with the flat opening of the wall panel inside and the inlaid opening outside.
Step 3: Install spacers and internal corners. Use rivets to fix the single side of the partition board's angle aluminum, cut it to size and then install it.
Step 4: Install doors, windows, etc.
Step 5: Install the circuit.
Step 6: After all installation steps are completed, seal the house and apply glue.