1. The installation of steel structural parts must meet standard requirements. Do not omit the positions that need to be welded, and do not weld incorrectly, which may cause instability or even cracking in the later period.

2. The wall should be installed horizontally and vertically, the caulking should be dense and smooth, the deep and shallow seams should be of the same width, and the board surface should not be damaged.

3. If you need to paste wallpaper indoors, make sure it is smooth, bubble-free and clean.
4. The ceiling should be assembled flat and with straight seams, and the gaps should be consistent. The wallpaper should be clean. There should be no broken spots on the board surface. Any damage to the wallpaper surface during transportation should be repaired.
5. The floor slabs should be laid with dust. Floor slabs with cracks on the surface are prohibited from being installed and used.
6. The surface of the cement or fine stone concrete surface layer should be densely calendered, and no defects such as cracks, peeling, sanding, and hollowing are allowed.
7. Asbestos tiles must be laid in the leeward direction according to the local wind direction characteristics, and the eaves should be kept straight. There should be no cracks in the tiles, the tile hooks should be tightened appropriately, and there should be no leakage in the roof.
8. The tinplate gutter joints of the container mobile house are welded firmly, and the joints must be anti-corrosion treated. There should be no accumulation of water in the gutter and no water leakage.
9. Doors and windows should be installed accurately and tightened with bolts.
To prevent damage, maintenance is required after a period of use. The paint on the surface may also fall off, so it needs to be repainted. Exposure to the sun for a long time outside will inevitably affect the peeling off of the paint on the box, causing paint peeling or rusting. If this happens to the box, it must be repainted in time, otherwise even if it is high For high-quality container houses, the box will slowly corrode over time, so applying a protective film to the box can better protect it;
After completion, it is recommended not to change the structure at will. The container mobile home is an integrated structure. Removing a small screw may cause a big impact and affect the overall structure. Do not dismantle things casually. If you find any screws falling off, you can tighten them in time. After completion, it is recommended not to change the structure at will. The container mobile home is an integrated structure. Removing a small screw may cause a big impact and affect the overall structure. Do not dismantle things casually. If you find any screws falling off, you can tighten them in time.