1. The window behind the door of the activity room should be open and flexible without blocking the rebound effect. The activity room should be clamped with glass springs. The embedded grease should be flat and smooth in a figure-eight shape, and there should be no surfaces or gaps. , glass clean, accessories and equipment secure.

 2. Standard parts should comply with the standards of GB5782. Anchor bolts must be installed accurately according to the specifications and locations required by the design office, and seals must be installed. No missing installation or under-installation is allowed. The butt anchors between the prefabricated components of the movable room door must be The bolts must be tightened.
 3. The prefabricated house must be re-painted with anti-corrosion paint once after being welded on site and where the topcoat has fallen off during transportation. The exposed parts of the prefabricated door components of the movable room should be repainted twice. The paint must not be missed, peeled, or hung. Rusty.
 4. Appearance requirements must be met: the walls must be straight and the joints close; the board walls should be clean, consistent in color, and neatly patchwork; the doors, windows, door locks, and power switches of the themed activity room must be flexible, and the prefab house must have accessories; the paint surface There should be no paint hanging, leaking, wrinkles, bubbling, etc.