1. There are two fixing methods for mobile room installation: penetrating type and concealed buckle type. Penetrating fixing is the most common way to install color steel plates on roofs and walls. In mobile houses, the color plates are fixed on supports. Penetrating fixing is divided into crest fixing, trough fixing or their combination. The mother ribs of the color plates are The fixation method of the central rib engagement of the concealed buckle is generally used for the installation of roof panels.

2. The side and end overlaps of the color plates. When installing each steel plate in the mobile house, the edge overlap should be accurately placed on the previous steel plate and clamped with the previous steel plate until both ends of the steel plate are until fixed. A simple but effective method is to use a pair of clamping pliers to clamp the overlapping steel plates separately. When the steel plate is in position along the longitudinal direction, its ends, especially the upper end, need to be clamped with pliers to clamp the overlapping part. This can ensure that one end of the steel plate is in place and the overlap at one end is also in the correct position, thereby fixing the steel plate. During the fixing process, the clamps should always clamp the steel plate longitudinally.
3. Before installing the next steel plate in the mobile house, each steel plate must be completely fixed. The fixing must start from the center of the steel plate, then extend to both sides, and finally fix the overlapping edges of the steel plate. For end lap joints, since the roof and wall profile panels are made by continuous processing, the steel plates can be supplied in a length limited by transportation conditions. Overlap is usually not required, and the length of the steel plates is sufficient to meet the needs of roof laying. .
4. At the same time, please note that the thickness of the steel purlins in the mobile house cannot exceed the self-drilling ability of the screws. The screws currently supplied can have plastic heads, stainless steel top covers, or be coated with a special durable protective layer. Other screws are equipped with waterproof washers. The mobile house is designed for The lighting panels and conditions under special wind pressure are equipped with corresponding special washers.
5. For color plates used on roofs, corresponding edge work should be carried out on the roof and eaves. The purpose is to more effectively prevent rainwater from entering the roof. When installing roof panels on mobile homes, insulation can be installed in the roof system. There is a very simple, economical and effective method. This method can also be used as a steam isolation to reduce condensation before installing roof steel panels. effect.
In the manufacturing and installation process of mobile house manufacturers, the construction team can complete the construction very easily and happily, which saves time and effort, and can save working time to a large extent. Mobile rooms are particularly suitable for use as temporary dormitories during construction, and can also be used as warehouses, office buildings and dormitories for construction workers. Prefab house manufacturers tell everyone that in addition to being very fast and convenient to build, prefab houses can also bring a certain degree of maintenance effects during use.